Power door locking switches – Subaru 2010 Forester User Manual

Page 103

Advertising
background image

Black plate (92,1)

北米Model "A8150BE-B" EDITED: 2009/ 10/ 2

2-6

Keys and doors

Item

Switch

position

Automatically turning

off

Map lights

OFF

*1

Approximately 20

minutes later

Dome light

DOOR

Approximately 20

minutes later

Ignition
switch light

Approximately 20

minutes later

Door step
lights

None

*2

Cargo area
light

DOOR

None

*2

*1: The map lights can be controlled by the
battery drainage prevention function only when
the map light switches are in the OFF position
and the door interlock switch is in the DOOR
position. For the switch positions, refer to

“Map

light

” F6-3

.

*2: The door step lights and the cargo area light
are not affected by the battery drainage
prevention function, so the lights do not turn
off automatically. To turn off the lights, it is
necessary that each door and the rear gate are
completely closed.

The operational/non-operational setting of
this function can be changed by a
SUBARU dealer. Contact your SUBARU
dealer to change the setting.

NOTE

. The factory setting (default setting)
for this function is set as

“operational”.

. When leaving the vehicle, please
make sure that all doors and the rear
gate are completely closed.

. The battery drainage prevention
function does not operate while the
key is in the ignition switch.

Power door locking switches

1)

Lock

2)

Unlock

All doors and the rear gate can be locked
and unlocked by the power door locking
switches located at the driver

’s side and

the front passenger

’s side doors.

To lock the doors, push the front side of
the switch.
To unlock the doors, push the rear side of
the switch.

When you close the doors after you set
the door locks, the doors remain locked.

NOTE

Make sure that you do not leave the key
inside the vehicle before locking the

Advertising
This manual is related to the following products: