Subaru 2010 Forester - Manual (Page 130)

Black plate (119,1)
北米Model "A8150BE-B" EDITED: 2009/ 10/ 2
The display can be switched as shown
below by pressing the trip knob.
*: “ ” or “ ” cannot be displayed when
the ignition switch is in the “ON” posi-
tion.
For the “ ” or “ ” indication, refer to
“Canceling the function for meter/gauge
needle movement upon turning on the
ignition switch
” F3-6.
! Odometer
The odometer shows the total distance
that the vehicle has been driven.
! Double trip meter
The trip meter shows the distance that the
vehicle has been driven since you last set
it to zero.
To set the trip meter to zero, select the A
trip or B trip meter by pushing the knob
and keep the knob pushed for more than 2
seconds.
CAUTION
To ensure safety, do not attempt to
change the function of the indicator
during driving, as an accident could
result.
NOTE
If the connection between the combina-
tion meter and battery is broken for any
reason such as vehicle maintenance or
fuse replacement, the data recorded on
the trip meter will be lost.
Instruments and controls
3-7
– CONTINUED –
3