Subaru 2010 Forester - Manual (Page 178)

Black plate (167,1)
北米Model "A8150BE-B" EDITED: 2009/ 10/ 2
Pressing the button cancels the “AUTO”
mode. To return to “AUTO” mode, turn the
fan speed control dial or airflow control
dial to a position other than the AUTO
position. Then turn to
“AUTO” mode.
SUBARU recommends using the AUTO
position.
NOTE
The air conditioner ’s compressor does
not operate with an outside tempera-
ture of 32
8F (08C) or lower.
& Temperature sensors
1) Interior air temperature sensor
2) Solar sensor
The automatic climate control system
employs several sensors. These sensors
are delicate. If they are not treated
properly and become damaged, the sys-
tem may not be able to control the interior
temperature correctly. To avoid damaging
the sensors, observe the following pre-
cautions.
– Do not subject the sensors to impact.
– Keep water away from the sensors.
– Do not cover the sensors.
The sensors are located as follows.
– Solar sensor: beside the windshield
defroster grille.
– Interior air temperature sensor: near
the ignition switch.
– Outside temperature sensor: behind
the front grille.
Climate control
4-11
4