Subaru 2010 Forester User Manual
Page 68
Black plate (55,1)
北米Model "A8150BE-B" EDITED: 2009/ 10/ 2
5. Before seating a child in the child
restraint system, try to move seat back
and forth and right and left to verify that it
is held securely in position.
6. To remove the child restraint system,
follow the reverse procedures of installa-
tion.
If you have any question concerning this
type of child restraint system, ask your
SUBARU dealer.
& Top tether anchorages
Your vehicle is equipped with three top
tether anchorages so that a child restraint
system having a top tether can be
installed in the rear seat. When installing
a child restraint system using top tether,
proceed as follows, while observing the
instructions by the child restraint system
manufacturer.
Since a top tether can provide additional
stability by offering another connection
between a child restraint system and the
vehicle, we recommend that you use a top
tether whenever one is required or avail-
able.
! Anchorage location
1)
For right seat
2)
For center seat
3)
For left seat
There is an anchorage located on the rear
edge of the ceiling above each seating
Seat, seatbelt and SRS airbags
1-33
– CONTINUED –
1