Subaru 2010 Forester - Manual (Page 7)

p
ower
/v
olUme
/
BrigHtness
Push the dial to turn the radio ON or
OFF. Turn the dial counterclockwise
to decrease volume and clockwise to
increase volume. The brightness of the
radio display dims when the light switch
is in the or position. If this
makes the display difficult to read, press
the volume dial for more than 2 seconds
to return display to original brightness.
fm/Am
Push the “FM/AM” button to select FM1,
FM2, FM3 or AM reception.
s
oUnd
/t
Une
c
ontrol
d
iAl
Each brief press of the “SOUND” control
dial changes BASS, MIDDLE, TREBLE, FADER
or BALANCE. Once the desired mode is
selected, turn the dial clockwise to increase
BASS, MIDRANGE, TREBLE and VOLUME.
Turning clockwise while in FADER mode will
increase front speaker volume and decrease
rear speaker volume. While in BALANCE
mode, turning clockwise will increase
right speaker volume and decrease left
speaker volume. Turning counterclockwise
while in desired mode will decrease BASS,
MIDRANGE, TREBLE and VOLUME. Turning
counterclockwise while in FADER mode will
increase rear speaker volume and decrease
front speaker volume. While in BALANCE
mode, turning dial counterclockwise will
increase left speaker volume and decrease
right speaker volume. For manual tuning, turn
the “SOUND/TUNE” control dial clockwise
to increase frequency and turn the dial
counterclockwise to decrease frequency.
p
resets
You can save up to six favorite stations
for each band – FM1, FM2, FM3 and AM.
Select a frequency and station. Press one of
the preset buttons for at least 1.5 seconds
to store it. After setting your presets, you
can get a favorite station easily by pressing
the desired preset button.
s
cAn
Press the “SCAN” button to begin
previewing the first 5 seconds of the
next highest frequency upward through
the band. Press “SCAN” again to stop
scanning and select a station you enjoy.
s
eek
Press the right arrow to increase the
tuning frequency. Press the left arrow to
decrease the tuning frequency.
s
At
(
if eqUipped
)
Press the “SAT” button to select the
satellite radio mode. See your Owner’s
Manual for detailed information.
c At
Press the “CAT” button for more than
2 seconds to turn category mode on.
Radio operations (channel selection and
channel scan) are performed only in that
selected category.
l oAd
Press the “LOAD” button. After the
DISC indicator begins to blink, “IN”
will appear on the display. You have 15
seconds to insert your disc. Insert the
disc slowly and it will automatically be
drawn in and playback will begin. Repeat
these steps to insert up to six discs.
To load the entire magazine, press the
“LOAD” button for more than 2 seconds.
The disc number indicator associated
with the idle position will blink. You
have 15 seconds to load the first disc.
Once that’s completed, the next disc
indicator will blink. When the magazine
is full, playback begins with the disc that
was inserted first.
t
rAck selection
Briefly press the “^” button to skip to
the beginning of the next track. Each
time this button is pressed, the indicated
track number will increase. Briefly press
the “
^
” button to skip to the beginning
of the current track. Each time this
button is pressed, the indicated track
number will decrease.
d
isc selection BUttons
Press the “CD/AUX” button to turn on
the CD. Select and press one of the
desired disc selection buttons to hear
the selected CD. Press the “CD/AUX”
button to select the AUX mode (when
the AUX unit is connected to the AUX
terminal). The AUX terminal is located in
the center console.
t ext
Press the “TEXT” button for more than
2 seconds for song or track. You will see
12 scrolling characters at a time.
r
epeAt
/r
Andom
Briefly press the “RPT” button and
release while a song is playing to play
the song repeatedly. To cancel the repeat
mode, press the button again. Press
the “RDM” button and hold it for more
than 2 seconds while the disc is being
played. The RDM indicator will come on
and all songs on the disc will be played
in random order. To cancel the random
mode, press the “RDM” button again.
e
ject
cd
Press the disc select button of the
disc you wish to eject. Press “EJECT”
to remove the disc. To eject all discs
from the magazine, press and hold
the “EJECT” button for more than 2
seconds. Remove each disc as it is
ejected from the changer.
12
2
1
4
5
8
3
13
14
A
udio controls
11
9
7
6
10
7
199382_10_Forester_QRG_042709.indd 8 4/27/09 4:09:29 PM