Subaru 2010 Forester User Manual

Page 121

Advertising
background image

Black plate (110,1)

北米Model "A8150BE-B" EDITED: 2009/ 10/ 2

2-24

Keys and doors

The moonroof operates only when the
ignition switch is in the

“ON” position.

& To open the moonroof

Pull the switch to the

“OPEN” side and

quickly release it to open the moonroof.
The sun shade will also be opened
together with the moonroof. The moonroof
will stop at a position 20 in (50 cm) away
from the fully closed position. Pull the
switch again to open the moonroof com-
pletely.

To stop the moonroof at a desired position,
momentarily push the switch to the

“CLOSE” or “OPEN” side.

After washing the vehicle or after it rains,
wipe away water on the roof prior to
opening the moonroof to prevent drops
of water from falling into the passenger
compartment.

& To close the moonroof

Push the switch to the

“CLOSE” side then

quickly release it to close the moonroof.
The moonroof will stop at a position 8 in
(20 cm) away from the fully closed
position. Push the switch again to close
the moonroof completely.

To stop the moonroof at a desired position,
momentarily push the switch to the

“CLOSE” or “OPEN” side.

& Anti-entrapment function

When the moonroof senses a substantial
enough object trapped between its glass
and the vehicle

’s roof during closure, it

automatically moves back by 6 in (15 cm)
from that point and then stops. The anti-
entrapment function may also be activated
by a strong shock on the moonroof even
when there is nothing trapped.

CAUTION

Never attempt to test this function
using fingers, hands or other parts
of your body.

NOTE

. For the sake of safety, it is recom-
mended that you avoid driving with the
moonroof fully opened.

. Driving with the moonroof fully open
can cause an annoying sound to gen-
erate at high speeds. If such a condi-
tion has been encountered, use the
moonroof at the initial stop position of
20 in (50 cm) away from the fully closed
position.

. If the moonroof cannot be closed
through switch operation because of
system failure, it can be closed manu-
ally using a hex-head wrench. For the
procedure, refer to

“Moonroof – if the

moonroof cannot be closed

” F9-17.

Advertising
This manual is related to the following products: