Subaru 2010 Forester - Manual (Page 199)

Black plate (188,1)
北米Model "A8150BE-B" EDITED: 2009/ 10/ 2
5-16
Audio
& Channel preset
! How to preset channels
1. Press the
“SAT” button to select SAT1,
SAT2 and SAT3 reception.
2. Select the desired channel.
3. Press one of the preset buttons for
more than 1.5 seconds to store the
channel. If the button is pressed for less
than 1.5 seconds, the preceding selection
will remain in memory.
NOTE
If the connection between the radio and
battery is broken for any reason such
as vehicle maintenance or radio re-
moval, all channels stored in the preset
buttons are cleared. If this occurs, it is
necessary to reset the preset buttons.
! Selecting preset channels
Presetting a channel with a preset button
allows you to select that channel in a
single operation. Up to six SAT1, SAT2
and SAT3 channels each may be preset.
& Display selection
Press the “TEXT” button while receiving
the satellite radio to change the display as
follows.