Subaru 2006 Baja User Manual
Page 102
Advertising
2-13
Keys and doors
– CONTINUED –
Transmitter circuit board
To register a new transmitter with the keyless entry
system, it is necessary to program the transmitter’s
code (identification number) into the system. A label
showing the code is affixed to the bag containing the
transmitter, and another is affixed to the circuit board
inside the transmitter. If there is no bag, open the
transmitter case and make a note of the eight-digit
number. Program the number into the system in ac-
cordance with the following procedure:
1. Firmly close the doors.
2. Open the driver’s door, sit on the driver’s seat, and
close the door.
3. Perform the following steps within 45 seconds.
1) Open and close the driver’s door once.
UB2209BA
200813
Advertising
This manual is related to the following products: