Subaru 2006 Baja - Manual (Page 279)

7-26
Starting and operating
T Selector lever release button
If you inadvertently have turned the ignition switch to
the “OFF” position with the selector lever in the “N” po-
sition, proceed as follows. By referring to the “Shift
lock release” section in this chapter, remove the shift
lock release cover. Then, with the screwdriver inserted
into the hole, move the selector lever to the “P” posi-
tion while pressing the release button. If the selector
lever reverse inhibiting function fails, have the vehicle
inspected by the nearest SUBARU dealer.
„ Selection of SPORTSHIFT mode (man-
ual mode)
1) Selector lever
1. Select the SPORTSHIFT mode by moving the se-
lector lever into the manual gate from the “D” position
with the vehicle stationary or moving.
UB7039BA
1
UB7027BB