Subaru 2006 Baja - Manual (Page 87)

1-62
Seat, seatbelt and SRS airbags
the following, have an authorized SUBARU
dealer perform the work. The SRS airbag con-
trol module, impact sensors and airbag mod-
ules are stored in these areas.
y
Under the center console
y Inside each front fender
y Steering wheel and column and nearby areas
y Top of the dashboard on front passenger’s
side and nearby areas
y
Inside each center pillar
In the event that the SRS airbag is deployed, re-
placement of the system should be performed
only by an authorized SUBARU dealer. When the
components of the SRS airbag system are re-
placed, use only genuine SUBARU parts.
To ensure their long-term reliability, the SRS airbags
must be inspected by a SUBARU dealer ten years af-
ter the date of manufacture, which is shown on the cer-
tification label attached to the driver’s door.
NOTE
In the following cases, contact your SUBARU deal-
er as soon as possible.
y
The front part of the vehicle was involved in an
accident in which the SRS frontal airbags did not
deploy.
y
The pad section of the steering wheel or front
passenger’s frontal airbag cover is scratched,
cracked, or otherwise damaged.
„ Precautions against vehicle modifica-
tion
y To avoid accidental activation of the system
or rendering the system inoperative, which may
result in serious injury, no modifications
should be made to any components or wiring of
the SRS airbag system.
This includes following modifications:
y Installation of custom steering wheels
y Attachment of additional trim materials to
the dashboard
y
Installation of additional electrical/elec-
tronic equipment such as a mobile two-way
radio on or near the SRS airbag system com-
ponents and/or wiring is not advisable. This
could interfere with proper operation of the
SRS airbag system.