Subaru 2006 Baja - Manual (Page 103)

2-14
Keys and doors
1) ON
2) LOCK
2) Insert the key into the ignition switch, then turn it
from the “LOCK” position to the “ON” position 10
times within 15 seconds.
NOTE
y When you complete step 2), an electronic tone
will sound once.
y
If you do not perform steps 1) and 2) within 45
seconds, an error will occur. An electronic tone
will not sound. In this event, perform the whole
procedure again beginning with part 1.
4. Open and close the door once within 15 seconds.
NOTE
y When part 4 of the procedure is completed, an
electronic tone will sound for 30 seconds.
y
If you do not perform the operations in part 4
within 15 seconds, an error will occur and the elec-
tronic tone will not sound. In this event, perform
the registration steps again beginning with part 3
of the procedure.
5. Before the electronic tone stops sounding, push the
lock side of the power door locking switch the same
number of times as the leftmost digit of the transmitter
code. For example, push the locking switch eight
1
2
HS2020BB
200874