Subaru 2006 Baja - Manual (Page 192)

5-15
Audio
– CONTINUED –
T To start playback
Press the “CD” button (16). The “CD” indicator will
come on and the disc number will appear on the dis-
play and the CD changer will start playback.
NOTE
y If the “CD” button is pressed during a radio
broadcast, the CD changer will interrupt the
broadcast.
y
At the end of the disc, playback automatically
continues with the next disc.
y
After playback on the last disc finishes, the play-
er will automatically return to the first disc.
y
If you have loaded fewer than 6 discs, any miss-
ing disc is automatically skipped.
T Selection of a desired disc
Discs cannot be selected using the main audio unit. To
select a disc, press one of the “Disc select” buttons
(these are numbered from 1 to 6) on the CD changer
unit. The disc will begin to play.
T To select a song from its beginning
Briefly press the “
” side of the track selection but-
ton (17) to skip to the beginning of the next track and
briefly press the “ ” side of the button to skip to the
beginning of the current track.
T Fast-forwarding and fast-reversing
Press the “
” side of the track selection button (17)
continuously to fast-forward the disc.
Press the “ ” side of the button continuously to
fast-reverse the disc.
Release the button to stop fast-forwarding or fast-re-
versing.
T Repeat playback
Press the “RPT” button (19) while a song is playing to
play the song repeatedly. The “RPT” indicator will
come on and the song will be played continuously. To
cancel the repeat mode, press the button again. Then
the “RPT” indicator goes out, and normal playback
mode is restored.
T Random playback
Press the “RAND” button (18) while a disc is being
played back to play all songs on the disc in a random
order. The “RAND” indicator will come on and all
songs on the disc will be played in a random order.
To cancel the random mode, press the button again.
Then the “RAND” indicator goes out, and normal play-
back mode is restored.
T Scan (a convenient way to become familiar with
a disc)
1. Press the “SCAN” button (20).