Subaru 2006 Baja - Manual (Page 63)

1-38
Seat, seatbelt and SRS airbags
11.While pushing the child restraint into the seat cush-
ion and moving it back and forth, pull the upper tether
belt straight up to secure the child restraint system
firmly by taking up the slack in the belt.
12.The loose end of the tether belt should be placed
into the gap on the backside of the seatback.
13.Before having a child sit in the child restraint sys-
tem, move it back and forth and right and left to check
if it is firmly secured.
14.To remove the child restraint system, follow the re-
verse procedures of installation. Unbuckle the seatbelt
and allow the belt to retract completely. The belt will
return to the ELR mode.
If you have any question concerning proper child re-
straint system installation, ask your SUBARU dealer.
NOTE
When the child restraint system is no longer in
use, remove it and restore the ELR function of the
retractor. The function is restored by retracting
the seatbelt fully.
T Installation of forward facing child restraint by
seatbelt only
1. Place the child restraint system on the seat.
2. Run the lap and shoulder belt through or around
the child restraint system following the instructions
provided by its manufacturer.
UB1147BA
UB1148CA