Subaru 2006 Baja User Manual
Page 241
6-32
Interior and exterior equipments
ly locked.
If this does not lock the cover, release it from a slightly
higher position. Do not push the cover forcibly to lock
it.
Removal and installation of the hard
bed cover
1) Brackets
y
When removing the bed cover, never remove
the brackets shown in the above drawing.
y
Removal and installation work should be per-
formed by at least two adults.
y
During the removal and installation work, be
careful not to trap your fingers between the
cover and cargo bed.
The bed cover can be removed and reinstalled as de-
sired.
T Removal
1. Open the front section of the cover. (Refer to
“Opening and closing the hard bed cover” in this sec-
tion.)
2. Take out the wheel nut wrench from the tool bag.
(Refer to “Jack and tools” section in chapter 9.)
1
UB6075BA