Subaru 2006 Baja - Manual (Page 44)

1-19
Seat, seatbelt and SRS airbags
– CONTINUED –
5. To make the lap part tight, pull up on the shoulder
belt.
6. Place the lap belt as low as possible on your hips,
not on your waist.
V Adjusting the front seat shoulder belt anchor
height
The shoulder belt anchor height should be adjusted to
the position best suited for the driver/front passenger.
To lower the anchor height, push the release button
and slide the anchor down. To raise the anchor height,
slide the anchor up. Pull down on the anchor to make
sure that it is locked in place.
Always adjust the anchor height so that the shoulder
belt passes over the middle of the shoulder without
touching the neck.
HS1051BA
HS1052BA