Optoma EH415 - Manual (Page 100)

100
Appendices
Command Description Remark (Parameter)
INPT INPT Input
switching
11 = VGA1
INPT? Inquiry about
input switching
12 = VGA2
13 = Component
14 = BNC
21 = VIDEO
22 = S-VIDEO
31 = HDMI 1
32 = HDMI 2
AVMT Mute control 30 = Video and audio mute
disable
AVMT? Inquiry about the
mute state
31 = Video and audio mute
enable
ERST? Inquiry about the
error state
1st byte: Fan error, 0 or 2
2nd byte: Lamp error, 0 to 2
3rd byte: Temperature error,
0 or 2
4th byte: Cover open error,
0 or 2
5th byte: Filter error, 0 or 2
6th byte: Other error, 0 or 2
0 to 2 mean as follows:
0 = No error detected, 1 =
Warning, 2 = Error
LAMP? Inquiry about the
lamp state
1st value (1 to 5 digits):
Cumulative LAMP operating
time (This item shows a
lamp operating time (hour)
calculated based on that
LAMP MODE is LOW.)
2nd value: 0 = Lamp off, 1 =
Lamp on
N
ote
N
ote
This projector is
fully compliant to
the specifications
of JBMIA PJLink™
Class 1. It
supports all the
commands defined
by PJLink™
Class 1, and
the compliance
has been
verified with the
PJLink™ standard
specifications
Version 1.0.