Optoma EH415 - Manual (Page 52)

52
User Controls
Function 1
Set F1 key as a hotkey for Brightness, Contrast, Color
Matching, Color Temp. or Gamma function.
Function 2
Set F2 key as a hotkey for Source Lock, Projection, Lamp
Settings, Mute, Zoom or Volume function.
IR Function
Enable or Disable projector’s IR function.
Remote Code
Press ◄► to set Remote custom code and press “ENTER”
to change to the setting.
Options |
Remote Settings
N
ote
N
ote
The remote control number must match the projector number for
accurate control;
To set the Remote Control Number: Press‘Remote ID’ until the
LED above the Power Off button in the top-right of the remote
control starts to flash, then input the desired remote control
number (between 01-99) while the light is flashing. The LED
will flash quickly three times to indicate a successful change.
Press‘Remote All’ until the LED flashes quickly 3 times to reset
the remote control number back to ‘All’.
A remote control set to ‘All’ can be used to control any projector
– regardless of whether the projector has a set number or not.