Optoma EH415 - Manual (Page 46)

46
User Controls
Setup | LAN Settings
If the connection is successful, the OSD display will show
the following dialogue box.

Network State—to display network information.

DHCP:
On: Assign an IP address to the projector from the DHCP
server automatically.
Off: Assign an IP address manually.

IP Address—Select an IP address

Subnet Mask—Select subnet mask number.

Gateway—Select the default gateway of the network
connected to the projector.

DNS—Select DNS number.

Apply—Press “ENTER” to apply the selection.

MAC Address—Read only.
N
ote
N
ote
Network sub-
menu can only
be accessed if a
network cable is
connected.