Optoma EH415 - Manual (Page 72)

72
Appendices
Replacing the Lamp
The projector automatically detects the lamp life. When
the lamp life is nearing the end of use, you will receive a
warning message.
When you see this message, please contact your local
reseller or service center to change the lamp as soon as
possible. Make sure the projector has been cooled down
for at least 30 minutes before changing the lamp.
Warning: Lamp compartment is hot! Allow it to cool down
before changing lamp!
Warning: To reduce the risk of personal injury, do not drop the
lamp module or touch the lamp bulb. The bulb may shatter and
cause injury if it is dropped.