Optoma EH415 - Manual (Page 36)

36
User Controls
Display | 3D
3D Mode

DLP Link: Select DLP Link to use optimized settings for
DLP Link 3D Glasses.

IR: Select IR to use optimized settings for IR-based 3D
images.
3D2D
Press ◄ or ► to select projector display 3D content in 2D
(Left) or 2D(Right) without using 3D glasses to enjoy 3D
content. This setting can also be used for dual projector
passive 3D installations.
3D Format

Auto: When a 3D identification signal is detected, the
3D format is selected automatically. (For HDMI 1.4 3D
sources only)

SBS: Display 3D signal in Side-by-Side format.

Top and Bottom: Display 3D signal in Top and Bottom
format.

Frame Sequential: Display 3D signal in Frame Sequential
format.
3D Sync. Invert
Press ◄ or ► to enable or disable the 3D Sync invert
function to invert images.
N
ote
N
ote
3D settings would
be saved after
adjustment.