Optoma EH415 - Manual (Page 20)

20
User Controls
Using the Remote Control
Volume +/- Press “Volume +/-” to adjust volume.
V Keystone
+/-
Adjusts image distortion caused by tilting the
projector. (±30 degrees)
Format Refer to the “Format” on page 34.
Zoom Press “Zoom” to zoom out images.
Remote ID
Press until Power LED is flashing then press
01~99 to set the particular remote code.
Remote All Press to set remote code to all.
VGA1
Press “VGA1” to choose source from VGA- IN
connector.
S-Video Press “S-Video” to choose S-Video source.
HDMI Press “HDMI” to choose HDMI source.
Re-sync
Automatically synchronizes the projector to the
input source.
VGA2
Press “VGA2” to choose source from VGA- IN
connector.
Video
Press “Video” to choose Composite video
source.
DVI
Press “DVI” to choose source from DVI-D
connector.
BNC Press “BNC” to choose BNC source.
YPbPr Press “YPbPr” to choose YPbPr source.
DisplayPort Press “DisplayPort” to choose DisplayPort
source.
3D Press “3D” to turn on/off 3D menu.
N
ote
N
ote
Due to the
difference in
applications for
each country,
some regions may
have different
accessories.
N
ote
N
ote
Due to generic
remote, function is
model dependent.