Dell TL2000 - Manual (Page 203)

Table 10-1.
1 Ready/Activity LED
(green)
3 Attention LED (amber)
2 Clean Drive LED
(amber)
4 Error LED (amber)
Installing Your Drive(s) in the Replacement Library Enclosure
Note: It is important to install the drives from the defective library into the
same positions in the replacement library enclosure in order to maintain
your current library configuration.
1. Remove all drives from the defective library (see Figure 10-18 on page 10-18)
and install them in the same positions in the replacement library enclosure.
a77ug200
1 2 3 4
Figure 10-17. Library Front Panel LEDs
Chapter 10. Check, Adjust, Remove, and Replace 10-17