Dell TL2000 - Manual (Page 77)

2. Enter the current Time using the HH:MM:SS 24-hour format.
3. Enter the current Date using the MMDDYYYY format.
4. Click one of the following:
v Refresh - to update the current screen
v Submit - to apply changes made to the current screen
Configuring Logs and Traces using the Web User Interface
This function is not available on the Operator Control Panel.
1. Click Logs & Traces in the left navigation pane.
2. For Error Log Mode, select Continuous so all information for logs and traces
will be captured.
3. Leave all options under Trace Level and Trace Filters selected. These options
can be changed by Service personnel only.
4. Click Submit to apply any changes.
Entering Event Notification Information using the Web User
Interface
This function is not available on the Operator Control Panel.
Use this menu item to set up email notification of library errors and warnings.
1. Click Event Notification in the left navigation pane.
a77ug061
Figure 4-30. The Configure Library: Date and Time screen
a77ug071
Figure 4-31. The Configure Library: Logs and Traces screen
Chapter 4. Installation and Configuration 4-27