Dell TL2000 - Manual (Page 74)

Entering Library Network Settings
This page shows the current network configuration of the library and allows
modification to the configuration. When a change is requested, a pop-up box will
ask to confirm the changes.
1. Click Network in the left navigation pane, to display the Network page.
2. Select a Protocol Stack - Choose IPv4 only , IPv6 only , or Dual Stack IPv4 &
IPv6 .
Note: When changes are made, the following Warning message will appear
when the Submit button is clicked.
The library must be rebooted or the changes will not take place.
3. Enter IPv4 settings (if applicable).
a77ug074
Figure 4-27. Configure Library: Network page
a77ug171
Figure 4-28. Warning screen
4-24 Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide