Doremi Fidelio - Manual (Page 26)

FDO.OM.001852.DRM Page 26 of 77 Version 1.5
Doremi Labs
 Once the Fidelio Transmitter is recognized, a screen will appear that will indicate what
auditorium number has been assigned to the transmitter. Simply touch the Change
button on the screen to change the auditorium assignment (Figure 26).
Figure 26: Transmitter Change Auditorium Screen
Note: The frequency band is configured at factory and cannot be changed by the user.

When you have touched the change button, you will be presented with the Select
Auditorium screen. You can select auditorium assignments from 01 to 32.
Note: Any number with a blue square indicates that the auditorium number has been previously
assigned to a transmitter within your complex, not just the one currently plugged in (Figure 27).
Figure 27: Transmitter Select Auditorium Screen
 Once you have assigned the correct auditorium number, press the Home button (Refer
to Figure 8 for v1.1.2; Refer to Figure 24 for v2.2.0) on the tablet and disconnect the
USB cable connected to the transmitter.
 Label the transmitter with the appropriate auditorium assignment as a reference so that it
is installed in the correct projection booth.