Doremi Fidelio - Manual (Page 6)

FDO.OM.001852.DRM Page 6 of 77 Version 1.5
Doremi Labs
WARNING
THIS DEVICE MUST BE GROUNDED
IMPORTANT
Power requirements for electrical equipment vary from area to area. Please ensure that the
Fidelio meets the power requirements in the surrounding area. If in doubt, consult a qualified
electrician or a Doremi Labs dealer.
WARNING: Multiple sources of supply; disconnect all sources before servicing.
PROTECTING YOURSELF AND THE FIDELIO
Only a qualified professional can install the Fidelio system. Only use the antenna provided by
Doremi Labs.
The Fidelio transmitter (Fidelio TX) shall be mounted with a separation distance of at least 20cm
from any person. The Fidelio receiver (Fidelio RX) antenna shall be at least 5mm away from any
person and at least 20mm away from any other antenna.
The CaptiView transmitter (if connected to the Fidelio transmitter), or any other antenna, shall at
least be 20cm away from the Fidelio transmitter antenna
– usage of a USB extension cable will
be needed for the CaptiView transmitter connection.
Never touch the AC plug with wet hands. Always disconnect the Fidelio from the power supply
by pulling on the plug not the cord. Allow only a Doremi Labs dealer or qualified professional
engineer to repair or re-assemble the Fidelio. Apart from voiding the warranty, unauthorized
engineers might touch live internal parts and receive a serious electric shock. Do not put, or
allow anyone to put any object, especially metal objects, into the Fidelio. Use only an AC power
supply. Never use a DC power supply.
If water or any other liquid is spilled into or onto the Fidelio, disconnect the power and call a
Doremi dealer. The unit must be well ventilated and away from direct sunlight. To avoid damage
to internal circuitry, as well as the external finish, keep the Fidelio away from direct sources of
heat (heater vents, stoves, radiators). Avoid using flammable aerosols near the Fidelio. They
can damage the surface area and may ignite. Do not use denatured alcohol, paint thinner or
similar chemicals to clean the Fidelio. This can damage the unit.
Modification of this equipment is dangerous and can result in the functions of the Fidelio being
impaired. Never attempt to modify the equipment in any way. In order to ensure optimum
performance of the Fidelio, select the setup location carefully and make sure the equipment is
used properly. Avoid setting up the Fidelio in the following locations:
 In a humid or dusty environment.
 In a room with poor ventilation.

On a surface which is not level.

Inside a moving vehicle where it will be subject to vibration.
 In an extremely hot or cold environment.