Doremi LE100 - Manual (Page 16)

LE1.OM.002066.DRM Page 16 of 52 Version 1.1
Doremi Labs
5
Network Configuration
5.1 Network Configuration via Web GUI

For more information on logging into the Web GUI, see Section 4.
Figure 7: Network Configuration

Go to the Administration tab, click on the Control Panel link followed by the Networking
Configuration link.

Fill in the appropriate information for either Ethernet Port 0 or Ethernet Port 1 and click
on the Save button. The changes will take effect once the unit is rebooted (see Figure
7).
5.1.1 Adding or Removing NTP Servers

To add or remove NTP Servers, click on the Administration tab, select Control Panel and
then, under Time Settings, select NTP Servers (see Figure 8).
Control Panel
Reset Button
Administration
Save Button