Setting the time and date, Setting the time and date via web gui, 6setting the time and date – Doremi LE100 User Manual
Page 21: 1 setting the time and date via web gui
Advertising
LE1.OM.002066.DRM
Page 21 of 52
Version 1.1
Doremi Labs
6
Setting the Time and Date
6.1 Setting the Time and Date via Web GUI
Log into the LE100 Web GUI and go to the Administration tab.
Click on the Control Panel link followed by Time Settings.
Adjust the time and time zone to the desired configuration.
Click on the Update button for changes to take effect. (Click both Update buttons if
configuring the time and time zone.) See Figure 9.
Note: There is no need to reboot the unit when changing the time. However, a reboot is
required when changing the time zone.
Figure 9: Administration
– Time Settings
Advertising