Doremi LE100 - Manual (Page 27)

LE1.OM.002066.DRM Page 27 of 52 Version 1.1
Doremi Labs
9
Video Configuration

There are several settings to determine how the video is output from the LE100. To
adjust the video output settings, log into the LE100 Web GUI and go to the
Administration tab.

Select the Control Panel and click on the Video Configuration link (see Figure 15).

Use the drop down menus to select:
o The desired video format (1920x1080 60Hz, 1280x720 60Hz or Native)
o The desired layout (Progressive or Native)
o The desired HDMI mode (HDCP active or HDCP inactive)
o The desired HDMI color space
o The desired HDSDI color space
o The desired 3D output mode (Dual HDMI/HDSDI, Single HDMI
– Frame Packing
or Native).
Note: The Video Output Format and Video Output Layout settings are ignored when using
SENSIO or RealD content.

Click on Save to save the new configuration. The new configuration will be effective with
the next clip that is loaded.
Figure 15: Video Output Configuration