Doremi LE100 - Manual (Page 46)

LE1.OM.002066.DRM Page 46 of 52 Version 1.1
Doremi Labs
15.2 Software Update via FTP Client
 Make sure that an FTP client is installed on the computer.
 Turn the LE100 on and make sure it is able to ping to the network.
 Open the FTP client; connect using the IP address of the LE100 with port 22 and login
as the "Admin" user with the appropriate password.
 Upload the update package (".pkg” file) to the folder /doremi/etc/rc.once and then reboot.
15.3 Verifying the Software Update
To check if the upgrade was successful, log into the Web GUI and the software version will be
shown in the top right corner (see Figure 31), or open an SSH session and type the following
command: tail /doremi/log/update.log and verify that the ".pkg" file installed successfully.
Figure 31: Software Version