Oxmoor MCS - Manual (Page 25)

Page 23
LOCAL MUSIC
VOLUME
ONLY
OFF ON
MCS–RP
MCS-RP ROOM PANEL
(Refer to Figure 4.2)
The Room Panel provides a “master” volume control for the
room. The panel operator may select either the LOCAL sound
source (usually a mixer) or background MUSIC to be “active,
that is to be heard in the room. Both sources may also be
deleted. Panel security is provided by a locking Key Switch. The
key may be removed in any of the three switch positions.
When rooms are combined, or “linked,” at the Master Control,
all functions of their Room Panels synchronize or act as one.
This means you may control the combined-room system at any
Room Panel in the linked rooms.
MCS-RP ROOM PANEL OPERATION
Action
1. Turn Key Switch ON.
2. Select desired audio source (LOCAL, background
MUSIC, or none) as follows:
a. Push a LOCAL or MUSIC button that does not
have an LED illuminated.
b. Push the button of an active LOCAL or MUSIC
source (LED illuminated).
3. With a sound source active, adjust volume control to
desired level.
4. Turn Key Switch to VOLUME ONLY and remove
key.
5. Turn Key Switch OFF and remove key.
Result
All RP functions operable; no security provided against
unwanted tampering.
The source selected becomes active in the room and in all
rooms to which it is linked. (This assumes that the SOURCE
is active at the Master Control.)
LED on selected button is illuminated.
If other source was active (LED illuminated) the new selection
replaces the previous one. Only one source may be active at a
time.
Volume returns to the last setting for the source (LOCAL or
MUSIC) that has just been selected. For example, you may
adjust the background MUSIC level as desired then switch to
LOCAL and change the level as required. When you return to
MUSIC, the volume control will return to the setting at which
you left it.
Both sources inactive; both LEDs are off until a source is
again selected.
Volume is adjusted in the room.
LED indicator shows volume control setting.
Volume control remains functional; LOCAL and MUSIC
switches are locked out, protected from tampering.
All LEDs function, providing status indication.
All functions are secured, rendering the Room Panel controls
tamper proof.
No LEDs are illuminated.
Figure 4.2: MCS-RP Room Panel
“