Xilica Neutrino Series - Manual (Page 13)

Neutrino Series - Quick Start Guide
XILICA AUDIO DESIGN CANADA / ASIA / EUROPE
Pag
e
13
information (source & destination labels) and more can be adjusted & labeled in this menu.
Processor Module
Neutrino is an open architecture DSP and you use the NeuConsole drag and drop software to
create your own specific DSP design layout for each project application.
(a) From
System Components in the Component Libraries on the left of the Project
View/Design Mode work area – click and drag the Neutrino A1608 processor module we will
use for our design example and drop it onto the Project View/Design Mode work area as
shown below.
(b) You will notice that the red A1608 processor module placed in the project view work area is a
light see through red color.
Processor Module / Project View
(a) With the red Neutrino A1608 DSP module placed in the Project View work area we can create the
overall project view of the application design by dragging audio source and other audio
components into the work area and wiring/connecting them to the processor module to then
represent the other physical audio components that are connected to the physical Neutrino
processor. As shown below on Page 14.