Xilica Neutrino Series - Manual (Page 3)

Neutrino Series - Quick Start Guide
XILICA AUDIO DESIGN CANADA / ASIA / EUROPE
Pag
e
3
4. Introduction and Description:

Thank you
Hello from everyone here at Xilica Audio Design and thank you for purchasing our
Neutrino Series digital processor.
Since Neutrino is setup and controlled by a host computer via Ethernet it is important that we get
you connected and up and running as quickly and easily as possible. Thus the first portion of this
Quick Start Guide is dedicated to getting the Neutrino processor and the NeuConsole software
connected and operating with ease. Once the Neutrino processor and the NeuConsole software
is connected and operational we believe you will find working with the software and processor to
be straight forward as outlined in the balance of this Quick Start Guide. If you have any
suggestions for making this quick start guide better in that or any regard please bring them to my
attention at
[email protected] and we will make those changes.

Neutrino Series Digital Processor
Designed in Canada and built on the audio performance reputation of our 40 Bit, Floating Point
DSP Engine and High Performance 24 Bit Converters
– Neutrino brings a new level of audio
performance, ease of use, and value to the world of open architecture-drag & drop audio
processing for fixed audio installations.
Neutrino Series processors are available in four I/O model configurations - 8x8, 8x16, 16x8 and
16x16 with Mic/Line input selection per input, 48v phantom power and premium grade mic pre-
amps. Neutrino A-Series N, D, AEC, ND, and N-AEC model versions provide Dante enabled
Network I/O (N), Digital I/O (D), Acoustic Echo Cancelation Inputs (AEC), and Network/Digital
(ND) & Network/AEC (N-AEC) combo model versions for added I/O and application flexibility.
From a large palette of audio DSP modules, create your personal DSP system design to
accommodate each unique project requirement using the NeuConsole drag & drop software.
Control Neutrino via Ethernet using the included NeuConsole software GUI, from any PC using
our NeuPanel PC control designer, with the logic input/relay output ports, using our optional
NeuPanel Series - Mini and Touch model wall controls, using your own Android device via our
free NeuPanel/Touch software, using your iOS, OSX, or Android device via the browser control in
our optional Centro SM1 site manager, or with any third party controller.
Optional NeuPanel Series – Mini Model Programmable Wall Controls – See www.xilica.com