Xtramus MCM-W V1.3 - Manual (Page 13)

E. Front Panel of MCM-8S62-W
MCM-8S62-W Front Panel Specification
Port A CX4
Interface
Port B SFP+
Data Transfer Rate 10 Gbps
Ethernet Mode
10GBase-LR
10GBase-SR
10GBase-CX4
LED Status
Green ON
MCM-8S62-W is booting properly and is
ready for tests.
SYS
Yellow ON Error occurred when booting MCM-8S62-W.
Green ON Port A/B is connected.
A/B
Green Blinking Port A/B is transmitting/receiving data.
Note: All LEDS will be off when upgrading FPGA/Firmware
13
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®