Xtramus MCM-W V1.3 - Manual (Page 20)

Optical Fiber
As mentioned above, there are Single-mode and Multi-mode optical fiber. Both of them can be used for
MCM-W series.
Fiber Connector
Optical fiber connector contains two ends of fibers and can attach
to SFP+ transceivers. There are two ports for one SFP+
transceiver: one fiber is for receiving and one fiber is for
transmitting. The picture here is called LC connector that can
attach to SFP+ transceiver.
Transceiver (Connector)
SFP+/XFP Transceivers can be plugged into MCM-W’s SFP+/XFP Ports.
SFP+/XFP Transceivers are active components that consume power from
MCM-W and are capable of converting signals between optical data flow and
electronic data flow.
For different transmission purpose, the component inside SFP+ form factor can
be 10BASE-LR or 10BAST-SR mode.
20
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®