Xtramus MCM-W V1.3 - Manual (Page 29)

3.1.5. MCM-W Management Webpage – Management
There are 4 options available for Management, which includes:
• IP Settings: Allows you to set how MCM-W will acquire its IP, subnet mask, and gateway
addresses. Also, you could input these addresses manually here.
• User Settings: Allows you to change MCM-W’s configuration webpage User Name and
Password.
•
System Configuration: You can set System Contact, System Location, and System Name
here.
•
SNMP Setting: You can make SNMP (Simple Network Management Protocol) settings here.
• Link Loss Forwarding: You can enable/disable Link Loss Forwarding function here.
Please see the sections for detail descriptions about settings available in Management:
A. IP Configuration
IP Configuration
IP Mode
You can choose how MCM-W acquires its IP, subnet mask, and
gateway addresses. There are two modes available:
• Static: You have to input MCM-W’s IP, subnet mask, and
gateway addresses manually in the fields down below.
•
DHCP: MCM-W acquires its IP, subnet mask, and gateway
addresses automatically from network’s DHCP server.
IP Address You can input MCM-W’s IP address here in this field.
Subnet Mask You can input MCM-W’s subnet mask here in this field.
Gateway You can input MCM-W’s gateway address here in this field.
Apply Apply the changes you’ve made here.
＊Note: The default IP address for MCM-W is 192.168.1.8.
29
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®