Xtramus MCM-W V1.3 - Manual (Page 38)

Establishing Connection with MCM-W
2. Select the COM port of PC for this connection. Click “OK” to
continue.
3. Set the COM port parameters according to the settings listed
down below:
•
Bits per second: 38400
• Data bits: 8
• Parity: None
•
Stop bits: 1
•
Flow control: None
Click “OK” to continue.
Click the “Enter” key on your keyboard to start setting MCM-W via HyperTerminal. To log in, please
type MCM-W’s user name and password:
•
Default User Name: admin
•
Default Password: admin (Both the User Name and Password are case-sensitive.)
If you change MCM-W’s user name and password with MCM-W’s configuration webpage, please log
in with the new user name and password here.
38
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®