Xtramus MCM-W V1.3 - Manual (Page 6)

1. MCM-W Overview
1.1. General Descriptions of MCM-W
MCM-W is a complete and versatile solution for
applications such as FTTx, CWDM, and carrier
Ethernet. By the diversified speeds of
1,000Mbps and 10Gbps, Xtramus provides
standalone MCM-W for different applications
and can be applied according to your ideal
network topology.
Xtramus’ MCM-W provides various interfaces
such as UTP, SFP, SFP+, XFP and CX4. All these interfaces are developed to support the protocols such
as 100Base-Tx, 100Base-Fx, 1000Base-T, 1000Base-X, 10GBase-T, 10GBase-LR, 10GBase-SR and
10GBase-CX4, thus making your network more complete and solid.
All MCM-Ws are equipped with real-time LEDs which display the status of each port, thus allowing users
to view network status easily.
MCM-W provides an easy-to-access Management Webpage, allowing users to view system status,
counters, and network statistics.
Also, MCM-W supports MIB Counter Report including counters such as Packet, Byte, Broadcast packet,
Pause Frame, Length: 64 Bytes, Length: 65-127 Bytes, Length: 128-255 Bytes, Length: 256-511 Bytes,
Length: 512-1023 Bytes, Length: 1024-1518 Bytes, Unicast packet, Multicast packet, CRC Error, IP
Checksum Error (Not supported for MCM-7S81-W), Under size packet, and Over size packet.
With various interfaces, MCM-W provides different conversions between fibers and copper wires in
10Gbps Ethernet.
6
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®