Xtramus NuApps-QoS-RM V1.1 - Manual (Page 25)

25
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®
4.3. System Info/Configuration List
The System Info/Configuration List allows you to view system information, making port/test
configurations, and check test reports on the Main Display Screen.
System Information
By clicking the System Information on the
System Info/Configuration List, the System
Information screen will be shown on the Main
Display Screen located on the right side of
NuApps-QoS-RM’s main window.
Port Config
By clicking the Port Config on the System
Info/Configuration List, the Port Configuration
screen will be shown on the Main Display
Screen located on the right side of
NuApps-QoS-RM’s main window, allowing you
to make settings for the module ports.
Settings such as port transmitting rate,
auto-negotiation, gateway IP, IP mask and
protocol can be set here.
For more detail description about Port
Configuration, please refer to 4.8. Port
Configuration.