Xtramus NuApps-QoS-RM V1.1 - Manual (Page 39)

Frame Size (bytes with CRC)
Starting
from/Stopping at
The starting/ending size of the transmitted packet. The range of the Starting
from/Stopping at field is 60~16384.
Frame Size Step
The frame size will increase in arithmetic progression fashion, while the value
you set here will serve as its difference. The range of the Frame Size Step is
1~16384.
Custom
You can customize the size of each
transmitted packet manually by
enabling
Custom function and
clicking the Edit button. A Packet Size
Customization window will pop up.
You can customize the Frame Size on
this window, or reset all custom
settings by clicking “Default” button.
Click “OK” button to save the settings
or “Cancel” to exit the window without
saving the settings.
Packet Payload
This scroll-down menu allows you to set packet contents to Random, Increase,
0x55AA, 0x00FF, All 1 or All 0.
Throughput Load (%)
Starting
from/Stopping at
The starting/ending network traffic rate (%) of the test.
Load Percentage
Min.
The minimum acceptable network traffic rate (%) of the test.
Resolution
The test will stop when the difference between the current network traffic rate
and the last network traffic rate is smaller than the value you set here.
Acceptable Loss The acceptable rate of packet loss during the test.
39
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®