Xtramus NuApps-QoS-RM V1.1 - Manual (Page 44)

44
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®
4.9.7. Latency Snapshot Test
Latency Snapshot test measures the latency by capturing a certain quantity of frames per stream from
a starting time point. The load generated by NuStreams-2000i/600i can be customized with different
packet lengths and for specified period of times.
Test Iterations
Continuous Click to activate continuous testing with the same settings.
Duration (Secs)
The duration of time (in seconds) for the test. The range for the testing time is
1~5000.
Number of Trials
The number of times of the test. The range for the number of times of the test is
1~100.
Tx Rate
The rate of packet transfer. You can also set the load unit in percentage or
Mbps here.
Maximum
Receive
The maximum limit to receive packets in Mbps/sec.