Xtramus NuApps-QoS-RM V1.1 - Manual (Page 37)

37
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®
4.9.2. Test Configuration Overview
NuApps-QoS-RM supports the following tests:
Test Description
Throughput
Determines the DUT’s maximum capable throughput rate without dropping any
packets.
Packet Loss
Measures the percentage of packets that are not forwarded due to the lack of
resource.
Latency Measures the time it takes for the DUT to forward a packet.
Latency
Overtime
Measures the time it takes for the DUT to forward a packet in a time interval.
Latency
Snapshot
Measures the packet that DUT forwards in a determined time gap.
Jitter
Measures the undesired deviation from true periodicity of an assumed
periodic signal.
To start performing tests with NuApps-QoS-RM, please check the check box in front of the test you
would like to perform first. Unchecked tests will not be performed, and cannot access their report as well
during or after the tests.
You can access setting options for the tests you would like to perform by:
Accessing Test Setting Pages
Click the test you would like
to configure located on
System Info/Configuration
List.
Click the test you would like
to configure located on the
test tab menu.
For more detailed setting options regarding to Throughput, Packet Loss, Latency, Latency Overtime,
Latency Snapshot and Jitter, please refer to the sections down below.