Zilog ZAURCT - Manual (Page 45)

UM022903-0311 Frequently Asked Questions
ZAURA ™ RF Wireless Lighting Control
Installation Guide
39
Q.
What is the best way to track which of my luminaries are dimmers and which are non-
dimmers?
A.
It is conceivable that any given starter could be configured as a dimmer or a non-dim-
mer multiple times over its lifetime. Something as simple as a dot from a permanent mark-
ing pen on the end of a Starter could indicate a dimming starter. Labels, however, could
pose a problem, because starters have a tendency to get warm and the labels could peel off
or, if made if improper material, become a fire hazard.
Q.
Does a reset deassociate to only one Master, or to all masters?
A.
The Deassociating procedure depends on the method used. If the Luminary method is
used, all starters that are powered up and previously associated with the Master (when
both buttons are pressed) will be deassociated.
If the Configuration Tool Method is used, only the starter in the Configuration tool will be
deassociated (when the tool is powered up).
When Deassociating a Range Extender and using the Master method, all starters and range
extenders that are powered up will be deassociated when the two buttons are pressed &
held.