Analog Way ASCENDER 16 (LIVECORE) - Ref. ASC1602 User Manual - Manual (Page 29)

29
4.10 HDCP management
Keys’ checking is performed according to the most restrictive condition among the 2 following ones:
- Every 2 seconds
- Every 128 frames
HDCP protected content can be displayed only on HDCP protected outputs or displays. Therefore, whenever
an HDCP protected source is placed into a layer routed to a non-protected output, LiveCore™ unit will not
output the protected content on this non-protected output, and the layer will be muted.
If possible, LiveCore™ unit will allow displaying all other non-protected contents, otherwise the entire
output will be muted until the protected content is no longer routed to the affected output. See chapter 12.
Applications note and tips for more information.
The HDCP negotiation can be enabled or disabled on all HDCP inputs.
The HDCP negotiation can be enabled or disabled on all HDCP outputs.
LiveCore™ unit can manage HDCP repeaters on its outputs: up to 48 display devices can authenticate
simultaneously on each output.
In order to permit quick identification of all the HDCP operations on the device, LiveCore™ unit provides a full
set of status summary to help the user with the HDCP management:
- A front panel menu that displays all the general HDCP status of all inputs and outputs
- A Web RCS application map that displays a diagram with all the input/output status
- On the monitoring output, the HDCP status of each input will be indicated.
4.10.3 Keys’ checking
4.10.4 Output management
4.10.5 HDCP Classification
4.10.6 Status
Class Support
HDCP Receiver Yes
HDCP Transmitter Yes
HDCP Repeater No
HDCP Receiver
HDCP Transmitter
The input HDCP detection is managed by the input components according to HDCP specification.
LiveCore™ unit manages the output HDCP detection according to one of the following criteria:
- Hot plug,
- 3-second period attempt.
4.10 HDCP management
4.10.1 Input HDCP detection
4.10.2 Output HDCP detection