Analog Way ASCENDER 16 (LIVECORE) - Ref. ASC1602 User Manual User Manual
Page 72
72
7.3.17 Control management
Auto Calibrate
Click on start to launch an auto calibration of colors, on your analog input/output chips.
Erase memories
Into this section, you can erase individual settings.
• Erase input settings memory: All input settings will return to
their default value. This includes image, aspect, user format
and keying parameters.
• Erase preset memories: All preset memories will return to
their default value.
• Erase monitoring layout memories: all saved monitoring
layout configuration will be erased, the monitoring layout will
be the default one.
• Erase library logos: All saved logos and frames will be deleted
from the library that can contain up to 100 still pictures.
• Erase library EDIDS: All EDIDs saved on the library free slots
will be deleted.
• Erase library sequencer: all sequences saved on the sequencer
library will be deleted.
Factory reset
Configuration default value:
click on START to
reset all standard parameters of your device to
default settings.
• This setting does not reset the network/link
settings.
• Library frames and logos will not be erased,
the device will reboot after this operation.
Factory Reset (Out of the Box):
click on START
to reset all use parameters of your device to
default. After rebooting, you will find your unit
in the same state as when you opened the box
for the first time.
• This operation will reset the network and link settings.
• This operation will erase all libraries including the frames and logos library images.
• The device will reboot after this operation.
• This operation can also be found in the front panel.