Connecting a livecore unit, 1 rear panel of 4u livecore unit, Connecting a livecore™ unit – Analog Way ASCENDER 16 (LIVECORE) - Ref. ASC1602 User Manual User Manual
Page 30
30
5.1.1 Rear panel of a 4U LiveCore™ unit
1.
Power supply:
internal, autoswitching ; Typical consumption: Ascender 48: 405W / Ascender 32: 345W /
Ascender 16: 285W / SmartMatriX Ultra: 285W ;
2.
Inputs #1 to #12:
- 6 x HDMI
- 9 x DVI (6 x DVI-I & 3 x DVI-D / Dual link available on Inputs #2, #6 and #10)
- 3 x DisplayPort (Dual link available on Inputs #4, #8 & #12 )
- 12 x 3G/HD/SD-SDI
- 12 x Universal Analog (6 x HD15 & 6 x DVI-A)
3. Outputs #1, #2, #3 & #4:
- 8 x Universal Analog (4 x HD15 & 4 x DVI-A)
- 4 x DVI-I (DVI Dual-Link on outputs #1 & #3)
- 4 x Video Optical SFP module cage
- 4 x 3G/HD/SD-SDI
4.
Monitoring/Preview output:
- 2 x Universal Analog (HD15 & DVI-A)
- 1 x DVI-I
- 2 x 3G/HD/SD-SDI
- 1 x RGBs/RGsB/RGB/YPrBr/YC/composite analog output
5.
Tally, GPI-O connector
6.
Ethernet plug
7.
Frame Lock:
Analog Frame Lock plug and loop output
8.
Display output (not active)
9.
Devices sync.:
Used for synchronizing multiple devices in multi-machine mode.
10.
RS232 port:
Reserved for maintenance and SPU001 connection
11.
4 x USB plugs
12. Link cables:
Use the 3 link cables to share inputs/outputs in the additive modularity configuration.
5. CONNECTING A LIVECORE™ UNIT
5.1.1 Rear panel of 4U LiveCore™ unit
2
3
4
1
11
10 9
7
5
12
8
6