Analog Way ASCENDER 16 (LIVECORE) - Ref. ASC1602 User Manual User Manual
Page 57
57
7.3.10 Input management
In this tab, you can define what the input format exactly is. The input
format is automatically detected by the LiveCore™ unit but you can
change it or force it. The available formats are close to the current one,
in terms of lines. This is available only for analog computer formats.
The next tab is the USER FORMAT:
Next settings available on the ASPECT tab are:
- CROP:
use the Top, Bottom, Left and Right values to crop
your input. A finder is also available. When activated,
use the white rectangle to set up accurately the cropped
area.
Under the ASPECT RATIO section:
-
ASPECT IN:
Select the correct aspect ratio of your input (5:4 4:3 etc…). This setting doesn’t exist when the
input is set as native.
- PREDEFINED CROP:
Choose a specific cropped ratio if you use a source with black bands on top/bottom
or left/right
- ASPECT OUT:
Define the way the image will be displayed into a layer (full screen, centered, cropped or 1:1)
- OVERSCAN:
Choose to apply or not a predefined zoom on the image (use with CRT TV)