Avery Dennison 9406 System Administrator Guide - Manual (Page 101)

Setting Communication Values
Set communication values at the printer and the host.
At the Printer
First, turn on the printer and go to the Main Menu. Press
L
or
R until Setup appears. Press E and continue with the steps
below to set the communication values.
When you see Do this
SETUP
Supply >
Press R until you see Port
Settings. Press
E
.
PORT SETTINGS
Baud Rate >
Press E to set the baud rate.
BAUD RATE
2400 >
Press
L
or
R
until your
desired baud rate appears.
Press
E
.
PORT SETTINGS
Baud Rate >
Press
R
. Word Length
appears.
PORT SETTINGS
< Word Length >
Press
E
to set the word
length.
WORD LENGTH
< 8
Press L or R until the
desired word length appears.
Press
E
.
PORT SETTINGS
< Word Length >
Press
R
to display Stop Bits.
PORT SETTINGS
< Stop Bits >
Press
E
to set stop bits.
C
onf
igur
ing t
h
e
P
rin
te
r
7. Configuring the Printer
7-3