Avery Dennison 9406 System Administrator Guide - Manual (Page 9)

1. Introduction
Be sure you understand the information in the Operator’s
Handbook before you read this manual.
Read this manual if you
•
oversee the generation of labels or tags.
•
design labels or tags.
•
decide what to print on labels or tags.
This manual helps you design and print custom labels or tags
on the Monarch
® 9406™ printer.
About this Manual
This manual explains how to
•
design a label.
•
convert your design to a format.
•
build formats on a host.
•
prepare the printer to receive information for printing.
•
send data to the printer from a host.
•
set up printing procedures for printer operators.
•
run printer diagnostics.
You need a host for many of the tasks in this manual. You need
not be a programmer, but you should have a thorough
knowledge of commands used by your host’s operating system.
On MS-DOS systems, for example, you should be familiar with
the COPY and MODE commands.
Int
rod
uc
tion
1-1