Avery Dennison 9406 System Administrator Guide - Manual (Page 102)

STOP BITS
1 >
Press
L
or
R
until the
desired stop bits setting
appears. Press
E .
PORT SETTINGS
< Stop Bits >
Press
R
to display Parity.
PORT SETTINGS
< Parity >
Press E to set the parity.
PARITY
None >
Press L or R until the
desired parity appears. Press
E
.
PORT SETTINGS
< Parity >
Press
R
to display Flow
Control.
PORT SETTINGS
< Flow Control >
Press E to set flow control.
FLOW CONTROL
< DTR
Press L or R until desired
flow control appears. Press E .
NOTE: Set the Flow Control
to DTR for IBM PC-
compatible
equipment.
PORT SETTINGS
< Flow Control >
Press
Q
twice to return to the
Main Menu.
9406 System Administrator’s Guide
7-4